top of page

META KING ATLANTIC TRAWLER - €200,000 (VAT included)

PRICE DROP

PANO.gif

A robust, long-distance cruising vessel designed by Joubert/Nivelt and built by the French shipyard META using thick aluminum and the STRONGAL process, this trawler offers a unique experience for safe and reliable travel anywhere. With a range of 3,500 nautical miles, it is equally suited to rivers and the open sea, with no destination limitations. Purchased by its current owner in 2014, it has undergone a major electronic upgrade, along with various painting and preparation work for the Northwest Passage. Fitted out in matte-varnished teak by a carpenter, the heated and insulated interior is warm and bright. Only the final preparations before relaunching remain.

A word from the owner:

I bought this beautiful Meta trawler in 2014 with the intention of sailing the Northwest Passage. Having previously been a keen sailor, I figured the comfort of living aloft, without sails to manage, with a very small crew, was well worth the sacrifice of the mast and its sails. I enjoyed the boat around Ireland, then up to the entrance of the Northwest Passage after updating the paintwork and electronics. After two unsuccessful attempts at the Northwest Passage in 2017 and 2018, I decided to sail her back down to France. Unfortunately, such challenging voyages are now contraindicated for me, and I am putting this excellent trawler up for sale without having been able to complete my project. The price has been significantly reduced due to health reasons, and a quick sale is expected.

Technical Specifications

Year: 2000
Architect: Michel JOUBERT / Bernard NIVELT
Width: 3.62m
Version: 2 cabins
Ballast type: NC
Engine: Nanni Diesel 62hp (4825 hours)
Nanni Diesel 62hp (4815 hours)
Sleeping capacity: 4
Water capacity: 420 L

 

Construction site: META / FR
Length: 12.85 m
Material: Thick aluminum, Strongall process
Draft: 1m
Displacement: 12000 kg
Cabin(s): 2
Fuel capacity: 3850 L (usable)
Visible: Atlantic France

First owner: no

Administrative situation

Falg :: France
Berth in the port: no

VAT: paid in France / EU

Inventory

Engines : 

​

Make: 2 x Nanni Diesel

Model: 5280HE

Power: 62 HP each

Drive: Cardan shafts / shaft drive

Engine hours: 4,825 hours

Propeller(s): Three-blade

​

Engines underwent major overhauls in 2017 and 2022. Stainless-steel propeller shafts replaced in 2017.

 

Onboard Living :

 

Aquaset watermaker, 100 litres/hour

Eberspächer water-circulation heating system with radiators, running on diesel and using engine heat exchangers

Interior teak joinery with matt varnish, in good condition

Owner's forward cabin with V-shaped berths measuring 0.90 x 2m (x2), wardrobe and storage

Starboard cabin with two single bunk berths, 0.75 x 2m

Port-side heads compartment with marine toilet, washbasin and separate shower

Marinedeck cockpit, in good condition

Painted aluminium side decks with non-slip chequer-plate finish

Tilting antenna mast

Vetus hot water tank (220V and engine-heated)

Pressurised freshwater system

Teak-lined hull sides and ceiling, matt varnish, in good condition

Original fabric upholstery, in good condition

Indel refrigerator, in good working order

Stainless-steel two-burner gas cooker/oven

Double stainless-steel sink

Laminate galley worktop, in good condition

U-shaped saloon seating in blue fabric, varnished wooden table with adjustable pedestal

Saloon convertible into a double berth

Watertight side doors to the wheelhouse (x2), with large windows

Aft transom door

Stainless-steel freshwater tanks: 270L + 150L dedicated to the watermaker

Headroom: 1.93m in saloon and forward cabin

Slatted bed bases on all berths

Aluminium passerelle

​

Safety :

​

Viking 6-person offshore liferaft, ISO 9650, last validity stated as 2019

McMurdo EPIRB distress beacon

Wamblee 20 personal AIS satellite locating beacon with MOB alarm and engine cut-off

Aluminium bow and stern rails, handrails and stanchions, 40mm diameter

Stainless-steel guardwires

Offshore safety equipment to be supplemented in accordance with local regulations

Plastimo steering compass

Bombard inflatable dinghy, 4-person capacity

Suzuki DT5 outboard engine

Directional 12V deck spotlight

​

Deck Equipment / Manoeuvring :

​

Rudder bearings replaced in 2017 – aluminium rudders in good condition

Vetus tunnel bow thruster, in good condition

Goïot 1500W / 12V electric windlass, fully overhauled in 2017

Aluminium propeller protection allowing the boat to take the ground

Fixed black rubber fendering on welded supports

6 large welded aluminium cleats

Large anchor locker forming a collision bulkhead

Anchor arrangement No. 1: 22kg CQR anchor + 100m of 10mm chain (2017)

Anchor arrangement No. 2: Brittany anchor + 30m of 10mm chain

Additional lightweight anchor(s)

Varnished wooden and stainless-steel steering wheels with hydraulic steering + emergency tiller

Adjustable aluminium davits

Cockpit cargo mast

​

Electrical System :

​

Onan 7.5 kVA generator, 1,500 rpm, 2008 (350 hours)

AGM service batteries, 6 x 110Ah, replaced in 2017

12V/220V two-pole electrical system

Engine start battery

Generator battery/batteries

12V 40A battery charger, powered by 220V shore supply or generator (2010)

800W inverter

220V electrical socket in saloon (powered by inverter)

​

Electronics :

​

Koden radar (2017)

New Koden EV autopilot (2017)

New Koden satellite electronic compass (2017)

Iridium satellite telephone with antenna mounted on mast

Raymarine navigation system with log/speed/depth/wind instruments (2017)

Echo Pilot forward-looking sonar (depth readings up to 60m ahead of the boat)

Robertson AP300X backup autopilot

Icom 423 DSC VHF

Icom M19 handheld VHF

MLR FX412 GPS with man-overboard button

Raymarine C97 chartplotter with 2017 cartography

AIS transponder interfaced with the navigation instruments

NX300 Navtex

Radio/CD player

 

Miscellaneous :

​

Dark blue hull repainted in 2017

Vetus double glazing with laminated glass

Fluorescent orange wheelhouse roof paint

Electric windscreen wipers (x3) + washers

Cockpit winter cover

Heavy-duty full cockpit Bimini

Bonded thermal insulation: 40mm foam + 5mm plywood, fitted behind the interior lining

Spare engine parts

Seacocks in good working order

Electric and manual bilge pumps

bottom of page