Agba 54 Aluminum - 2007 - €300,000 including tax

Designed and drawn by Guillaume Kryskampf, former head of the design office at the Pouvreau shipyard and former collaborator at the Harlé firm, this large, comfortably shaped, and safe aluminum cutter has been sailing the world's oceans since 2010. Its owner oversaw its construction with the help of certified marine welders, and designed it to be both elegant and welcoming. Conviviality is the watchword on board. Its layout, with three double cabins, a head and separate toilet, as well as a large living area, invites sailing with family or friends. Insulated, heated, and self-sufficient in water (60L/h watermaker) and electricity (generator, solar panels, wind turbine, two alternators for the engine and shaft drive), this aluminum cruising keelboat will take you to any destination.
A word from the owner:
“I designed and built this aluminum cruising sailboat with the guidance and advice of highly skilled professionals. I named it after the wood used for its interior fittings: Agba. This wood, native to West Africa, possesses ideal mechanical properties for cruising sailboats; it is lightweight yet strong and homogeneous, impervious to moisture and fungi, and even wood-boring insects cannot attack it. I wanted this long-distance cruising sailboat to be as comfortable as it is seaworthy, as self-sufficient as it is enjoyable, and I think I have succeeded. After more than 15 years of sailing, I wish to pass the torch.”
Technical Specifications
Year: 2007 (first navigation 2010)
Project: Amateur construction / FR
Architect: Guillaume Kryskampf
Length: 16.42 m
Width: 4.60 m
Material: aluminum
Version: 3 cabins
Rigging: Cutter
Draft: 2 m
Ballast type: Lead keel 5500kg
Loaded displacement: 16,800 kg
Engine: Perkins M92 B (2300 hours)
Cabin(s): 3
Sleeping capacity: 6
Fuel capacity: 550 L (diesel) + 400 L (fuel oil)
Water capacity: 450 L
Visible: French Antilles
First owner: yes
Administrative situation
Flag : France
VAT status: EU VAT paid
Leasing: no
Port berth: no
Inventory
Engine :
Brand: Perkins
Model: M92B
Power: 85 CV
Transmission: Propeller shaft
Operating hours: 2,300 hours
Propeller(s): three-bladed
4-cylinder inline engine with a displacement of 4.5 L, 35 mm prop shaft, Maucour rotary seal, and 400 three-bladed propeller—maintenance performed every 400 hours. Cruising RPM 1,600, speed 7 knots with a clean hull. Fuel consumption 4 L/h (average).
Engine equipped with a bipolar kit (isolated)
Comfort / Accommodation :
Agba and teak interior woodwork, traditionally assembled (very beautiful and durable)
Heating via:
- stainless steel fuel stove + water circulation through 6 cast aluminum radiators
- 230V heating element in the water tank + water circulation through 6 cast aluminum radiators
60 L/h watermaker, 24V
Large chart table with compass facing the road, next to the stove
Saloon on the starboard side with fixed table, bench against the hull + 4 chairs
Hot water tank (230V + fuel stove) 85L
Long galley on the port side—plenty of storage
Stainless steel sink with mixer faucet (pressurized fresh water) and seawater
Dishwasher
Stainless steel 3-burner gas stove and gas oven
Kitchen countertop with hanging rail
Upright refrigerator/freezer
Aft starboard cabin with double berth, closet, storage, and sink
Aft port cabin with double berth, closet, storage, and sink
Forward owner’s cabin with double berth, closet, and storage
All sleeping surfaces feature 12 cm foam mattresses and slatted bed frames
Water tank(s): 450 L
Pressurized water system with 24 L pressure pump
Forward portside bathroom with separate shower, sink, and storage
Washer/dryer in the bathroom
Separate forward starboard toilet (electric toilet flushed with seawater)
50L black water tank(s)
Folding cockpit table
Varnished teak cockpit floor and seating
Cockpit cushions
550L diesel fuel tank(s) and 400L heating oil tank
Ventilation ports on the deck (x6)
Sun awning + bimini top and side canopies
Deck panel and porthole covers
Large cockpit storage lockers (2)
Ventilated exterior gas locker for 2 13-kg cylinders (5 months' supply)
Safety :
Highfield 4-person semi-rigid dinghy with aluminum bottom (flat floor - double bottom).
Honda 8cv 4-stroke dinghy engine
Offshore safety equipment to be checked and supplemented in accordance with current local regulations
6-person container life raft, next inspection in 2027
Bilge pump (electromagnetic)
Maneuver :
Maxpower 24V bow thruster in a welded aluminum tunnel (125 kf)
Lofran's Falcon 24V/2000W electric windlass – radio control
Stainless steel steering wheel(s) with leather wrapping, Ø120cm, on a hydraulic valve pump system
Lecomble & Schmitt HP45 steering cylinder + reversible pump for autopilot
Furuno NavPilot 711C autopilot (replaced in late 2025)
Anchorage No. 1: Bugel anchor, 40 kg + 70 m of 12 mm chain + 70 m of 22 mm rope
Anchorage No. 2: Delta anchor, 25 kg + 30 m of 12 mm chain + 30 m of 22 mm rope
Additional CQR anchors (25 kg) + 10- and 12-mm chain
Aluminum frame for mounting solar panels
Removable stainless steel davits for the dinghy (on deck during ocean crossings—welded brackets)
Rigging and sails :
Oversized standing rigging, regularly inspected
14mm forestay, 12mm lower shrouds
Aluminum mast mounted on the keel (9.5 kg/m, 20 m), two sets of push-out spreaders
Spinnaker pole (5.50 m) Ø100 mm
Stiffening backstays
Mast balconies
46ST mast winches
Rigid halebas
85 sqm genoa on a Hybrid Contender furling system with a tri-radial cut, year 2014, 2025 UV stripe
Genoa furler
40 sqm cruising jib on a furler, Hybrid Contender tri-radial cut, 2014, UV 2025 coating
Cruising jib furler
54 sqm full-batten mainsail with 3 reefs, Hybrid Contender, tri-radial, 2014, on sliders
Set of main sails in good condition (regularly serviced)
Storm jib on snap hooks
Spare staysail, 30 sqm
Spare mainsail, 43 sqm
Cockpit winches: 64ST (x2), 46ST (x4) + Makita electric winch crank
Electrics :
Permanently installed gasoline generator in a compartment with forced ventilation
24V/75A engine alternator
AGM 12V/95Ah engine and generator starting batteries (2)
Additional 180A alternator
6x240Ah AGM service batteries
25A shaft-driven alternator
12V/24V/230V electrical system, all bipolar
24V wiring with double insulation + PVC sheathing (no leakage detected by leak tester)
Electrical leak tester
24V main panel + 12V secondary panel
Solar panels (750W total)
Wind turbine (600W)
24V/60A shore power charger
VDO battery manager
1500W 24V/230V inverter
Automatic 230V switch for shore power/generator/inverter
Electronics :
Computer with 16 GB of RAM and 512 GB of storage
Radar
SSB receiver
GPS
VHF (x2)
300W BLU transceiver
EPIRB
Standard Starlink antenna
Navigation software with AIS transmitter
Electronic charts
Android tablet with Navionics
Miscellaneous :
Very beautiful hull, exemplary construction, with shapes rounded enough for ice conditions
Reinforced structure + well-dimensioned hull thicknesses:
Hull: 10, 8, and 6 mm; keel: 12 and 10 mm; deck: 6 and 5 mm
Aluminum rudder on a gimbal protected by a very solidly constructed aluminum fin
Ertalon rudder bushings replaced in 2026
Hull and deck paint completely redone in 2026
Thermal insulation using Roofmate (XPS foam)+ aluminum composite. 13 layers equivalent to 27 cm of glass wool




