top of page

Patago 45 - 2008 - €380,000 incl. tax

pano.gif

Designed and built from extruded aluminum with the meticulous care for which architect and sailor Jean-François ANDRÉ is known, and beautifully finished in light cherry wood, this all-aluminum long-distance dinghy with a rigid, insulated, and heated canopy can be easily sailed by two people (or even alone—which the owner does quite often). It features three spacious double cabins, two bathrooms (one of which has been converted into storage space—easily reversible), and a saloon that converts into a double berth. Built in 2008, it was equipped to be both safe and self-sufficient (watermaker, solar panels, generator, etc.). The standing rigging was replaced in 2025, along with the electrical system. The owner is an enthusiast and expert on aluminum sailboats who has kept the boat in top condition. It is therefore truly ready to set sail again with a new crew.

​

Le Mot du propriétaire

​

"My Patago 45 is an aluminum cruising sailboat that I had built by cruising sailboat designer Jean-François André. I wanted a sturdy, seafaring boat capable of taking me far, with the low-maintenance simplicity and ruggedness characteristic of Jean-François’s designs. The build was a wonderful adventure, and I still take great pleasure in seeing this boat, which perfectly matches my vision of a long-distance sailing yacht. However, reality turned out differently than I had planned: for various reasons—mainly work-related—I ended up not sailing as much or as far as I would have liked (Brittany, the Isles of Scilly...) with him. So she spent more time on pleasant cruises with family and friends than traveling the world. Now, I’d like to find her a new crew."

Technical Specifications

Year: 2008
Project: ECN (Jean-François ANDRÉ) - FR
Architect: Jean-François ANDRÉ
Length: 13.50 m
Width: 4.25 m
Material: aluminum
Version: 3 cabins
Rigging: Cutter
Draft: 0.95 / 2.80 m

Ballast type: Full centerboard
Light displacement: 10,700 kg

Load capacity: 13,000 kg
Ballast weight: 4,000 kg
Engine: Yanmar 4JH4-TE 75hp
Cabin(s): 3
Sleeping capacity: 8
Fuel capacity: 500 L
Water capacity: 390 L
Visible: Atlantic France

Administrative situation

Flag: France
VAT status: EU VAT paid
Leasing: no
Berth in the port: no

Inventory

Engine :

Brand: Yanmar
Model: 4JH4-TE
Power: 75CV
Drivetrain: Shaft drive
Operating hours: approximately 2,000 hours (hour meter not working)
Propeller(s): Three-bladed, featherable

Up-to-date and regular maintenance performed by certified professional

 

Life on board :

 

Dessalator D60 Watermaker – 60 L/h
Webasto diesel-powered water-circulation heating system / air heaters
U-shaped saloon on the port side
Solid wood saloon table with a top on jack legs / converts to a double berth
Red fabric saloon upholstery – in excellent condition
Interior laminate flooring with a cream-colored teak-style pattern (in very good condition) – lockable
Interior paneling in varnished light cherry wood, very well crafted, very attractive
Beautiful chart table on the starboard side at the bottom of the companionway – removable stool
Long kitchen on the starboard side
Corian kitchen countertop

ENO gas stove on a gimbal mount—stainless steel—2 burners and gas oven
230V microwave oven
Stainless steel double-bowl sink(s) with pressurized water mixer faucet + foot pump
ParMax3 pressurized water system with Jabsco pressure pump
12V front-opening refrigerator
12V side-opening freezer built into the kitchen countertop
Ample storage space in the kitchen
White ceiling paneling, in very good condition
Bright and spacious forward cabin – double berth on the port side (188x140)

Foredeck cabin with double berth (185x140) and storage
Forward bathroom with shower, marine toilet, and sink, converted into a storage area (reversible)
Corian countertop in the bathroom
Aft starboard cabin with double berth (241x140 cm at the shoulders) and storage
Large aft starboard bathroom with electric macerator toilet, shower, and sink
45L black water tank
Hot water tank (220V + motor) – insulated
Outdoor hot/cold shower on the aft scoop
Foredeck cabin with double berth (185x140) and storage
Forward bathroom with shower, marine toilet, and sink, converted into a storage area (reversible)
Corian countertop in the bathroom
Aft starboard cabin with double berth (241x140 cm at the shoulders) and storage
Large aft starboard bathroom with electric macerator toilet, shower, and sink
45L black water tank
Hot water tank (220V + motor) – insulated
Outdoor hot/cold shower on the fender
Aluminum handrails welded to the downhaul and the transom
Cockpit with teak grating floor and teak seats
Folding cockpit table
Large aft scoop with aluminum swim ladder and stern cleat
 

Safety :

 

SeaSafe 6-person liferaft in a container, manufactured in 2018 – next inspection due 04/2029
Welded aluminum through-hull fittings – valves on tubes above the waterline
McMurdo G5 Smartfind Plus GPS EPIRB (inspected in 2018/19)
Aluminum railings and stanchions + stainless steel guardrails
Very comprehensive safety equipment—to be checked and supplemented according to the requested flag or navigation area
Aluminum watertight bulkhead between the anchor locker and the forward cabin (crash box)
 

Maneuver :

 

Deep aluminum centerboard (2.80 m from stern to tip) with NACA profile, raised by a line via an electric winch
Aluminum rudder on a swivel
MaxPower retractable bow thruster
Aluminum stern gantry, serving as a davit, solar panel mount, and antenna mount
Lofran’s Tigre electric windlass
Aluminum mast balconies (2)
Anchorage #1 with plowshare anchor, 90 m of chain
Stern anchorage
Spare anchors (2)

Large anchor locker with a chain compartment isolated from the hull and a watertight bulkhead
Three-bladed propeller with a folding mechanism behind an aluminum skeg
3D Tender high-pressure hull dinghy – in good condition
Honda BF2.3 2.3cv 4-stroke dinghy engine
 

Rigging and Sails :

 

2025 standing rigging, properly sized
Crank-operated backstays
Aluminum mast with 2 sets of spreaders, 17 m – mounted on the deck and strut
Folding composite mast steps (up to the masthead)
Aluminum boom
Halebas
Walder boom brake
2025 Lazy Bag (in two parts) and lazy jacks
Hydranet full-batten mainsail (3 reefs), 40 m² on mast track and ball-bearing cars (regularly serviced)
Hydranet genoa, 62 m², on furler – regularly serviced and recently treated with UV protection
Facnor genoa furler
21 m² furling staysail – regularly serviced and recently treated with UV-protective coating
Facnor furling staysail system
Staysail backstays

Adjustable headsail traveller blocks
Mainsail traveller track forward of the hardtop
Storm jib
Spinnaker
Aluminum spinnaker pole stowed on deck
7 Andersen winches:
- 2x58ST for genoa sheets
- 1x46ST electric winch at the piano (centerboard, halyards, etc.)
- 1x46ST at the piano
- 3x45ST at the masthead
Winch handles
Running rigging replaced in 2025
Deck hardware (mostly Ronstan) and complete running rigging in good condition for the sails currently on board
 

Electrics :

 

Vechline DBC80 solar panels (2x80W) mounted on a frame with Victron controllers (2)
Fisher Panda generator
Fisher Panda PMGi 5000 inverter
Engine alternator
Service battery bank
Anchor windlass battery
Bow thruster battery
Engine starting battery
Isolation transformer
Philippi controller for batteries, water, and diesel
Battery charger

12/230V Power Converter for the Chart Table
Philippi Electrical Leak Detector
12/230V Electrical Circuit
LED Interior Lighting

 

Electronics :

​

Aluminum mounting bracket for displays
Raymarine GPSMap 5008 chartplotters (x2) at the chart table and helm station
B&G H5000 autopilot, hydraulic actuator (very recent)
Autopilot control panel in the cockpit (starboard) very recent
Satellite phone
B&G navigation system (speed log/depth sounder/wind) with displays in the companionway (x2) and at the chart table (x1)
B&G wind vane and anemometer with analog display in the companionway
Simrad AI50 Class B AIS transceiver
Furuno GP32 GPS
Navigation center repeaters at the chart table
Raymarine RAY49E fixed VHF autopilot
Compass on the wheel stand

​

Miscellaneous :

 

Thermal insulation—highly effective
Deck paint and anti-slip coating in good condition
Rigid polyester companionway cover with large windows and well-integrated design
Fender lockers (2 on the sides for 2 gas cylinders + 1 for the stern anchor)
Large cockpit locker (port side) serving as an engine compartment—engine, watermaker, valves, pre-filters, etc.)
CE A-6 Certification—Declaration of Conformity
Hull plate thicknesses: keel 12 mm, plating 8 to 6 mm, deck 5 and 4 mm depending on the area
Headroom:
    195 cm in the lower deck
    202 cm in the aft cabin and aft bathroom
    187 cm in the galley
    177 cm in the forward cabin

bottom of page