Meta Outre Mer 37 CC - Year 1998 - €140,000 (VAT included)

The Meta Outre Mer 37CC is a true cruising sailboat designed for demanding sailors. Designed by Michel Joubert, this keelboat, built with thick Strongall™ aluminum, offers exceptional robustness for offshore sailing and the most challenging destinations. Its central cockpit provides safety and comfort at sea, while its careful insulation and heating allow for year-round sailing. Equipped with a watermaker and presented in good overall condition, this boat is ready to set sail. A reliable, durable, and reassuring sailboat, designed for long, self-sufficient voyages.
A word from the owner:
"We ordered this new sailboat from Meta in 1998 and fitted it out according to our wishes: space, light and good seamanship. Everything is accessible so that we can easily intervene if needed. It is an excellent and very comfortable travel companion for sailing as a couple or as a family and allows us to comfortably accommodate crew members for crossings for example."
Technical Specifications
Year: 1998
Construction site: Meta - FR
Architect: Michel JOUBDERT
Length: 11.40 m
Width: 3.50 m
Material: Thick Strongall™ Aluminum
Version: Central cockpit - 2 cabins
Rigging: Cutter
Draft: 1.60m
Ballast type: Keelboat
Light displacement: 7500 kg
Ballast weight: 2400 kg
Engine: Nanni Diesel 43hp (approximately 2000 hours)
Sleeping capacity: 6
Fuel capacity: 570 L + 50 L tank when full
Water capacity: 200 L
Visible: dry until the end of October 2026, French Antilles
First owner: yes
Administrative situation
Flag : France
VAT status: EU VAT paid
Leasing: no
Port berth: no
Inventory
ENGINE:
Make: NANNI DIESEL (Kubota-based)
Model: 4220 HE
Power: 43 HP
Drive: Direct drive via double universal joint in oil bath (Meta system)
Engine hours: 2,000 hours
Propeller(s): Fixed 3-blade aluminium propeller + 1 spare
Engine regularly maintained in accordance with the manufacturer's recommendations. Spare fixed 3-blade propeller available. Wurth HBW100 gearbox.
ONBOARD COMFORT:
Beautiful interior woodwork
Refleks M2 diesel stove heating in the saloon
Quicksilver BX16 hot water tank (08/2020), 16 L – 230V and engine heat exchanger
Compact Livol D30 watermaker (40 L/h), 12V
Full-beam aft double cabin with 190 x 140 cm berth (2025 mattress)
Forward owner's double cabin with 210 x 130 cm berth to port
Full-beam saloon with settees convertible into berths (x2)
Saloon table with folding leaves
Blue saloon upholstery
Longitudinal galley to port
Ice maker
Techimpex Mastergrill stainless-steel cooker – 2 gas burners, gas oven and gas grill
Beige laminate galley worktop
Stainless-steel sink with pressurised freshwater mixer tap and foot pump
ParMate 44010-2 pressurised freshwater pump with 5 L Varem accumulator tank
Top-loading refrigerator / icebox with Indel BD35F 12V refrigeration unit
New VETUS rotomoulded freshwater tanks, 200 L total capacity (2 x 100 L)
Aft bathroom to starboard with shower, Lavac marine toilet + Whale MK5 pump, washbasin and storage
Chart table to starboard at the foot of the companionway, housing navigation electronics and electrical controls
Comfortable and well-protected centre cockpit
Aft bathing platform with swimming ladders and easy access to the water
SAFETY:
AB 9 AL Lammina semi-rigid tender (03/2019) – 2.76 m, aluminium hull, Hypalon tubes
Offshore safety equipment to be checked and supplemented in accordance with current local regulations
Yamaha Enduro 15 HP 2-stroke tender outboard (02/2023) + 12 L fuel tank
Manual bilge pumps (x2) Whale MK5, 66 L/min (4,000 L/h)
6 lifejackets + safety harnesses
Seawater intakes and outlets through welded pipes (seacocks positioned above the waterline)
Deck jacklines
DECK EQUIPMENT / DECK GEAR:
Lofrans Tigre electric windlass, 12V / 1,500 W – operated from the helm station
Primary anchor: 16 kg Delta anchor + 70 m of 10 mm Lofrans chain (replaced in 02/2023)
Aluminium aft arch supporting solar panels, antennas and tender davits
12V diesel transfer pump (for topping up the day tank)
Portable Marco transfer pump (diesel, oil and water), 14 L/min – 12V / 10A
Mast steps and numerous handrails
VETUS hydraulic steering system with wheel
RIGGING & SAILS:
Oversized stainless-steel single-strand standing rigging (8 and 10 mm) – good condition
Furling genoa (UV protection strip to be replaced)
Profurl B25M genoa furler
Furling staysail (UV protection strip to be replaced)
Profurl staysail furler
Z-Spars Z601 aluminium deck-stepped mast with two sets of spreaders
Z-Spars aluminium boom
Walder boom brake
Mainsail with 3 full-length battens and 3 reefing points
Lazy bag and lazy jacks (to be renewed)
Well-sized Harken self-tailing winches
ELECTRICAL SYSTEM:
12V AGM Deep Cycle Marine service batteries, 3 x 180 Ah (06/2024)
SODEREP ECANS 250A double-pole battery isolator switches (x2)
Cirix 120A battery combiner
Longi bifacial solar panels, 700 W (12/2019)
Victron BlueSolar 100/50 MPPT solar charge controller
Pure sine wave 12V / 220V inverter, 2,500 / 5,000 W
Tecsup shore power battery charger
70A engine alternator
Octopus LED electrical leakage detector
WEMA 12V diesel fuel gauge
Electrical distribution panel with 18 E-T-A 3130 thermal circuit breakers
Perko LED interior lighting
Perko LED navigation lights
AirX 400W wind generator – removed, requires repainting
ELECTRONICS & NAVIGATION:
SIMRAD AP21 and AP22 hydraulic autopilot – Robertson/Simrad RPU180 pump + Vetus MTC 7210 hydraulic ram
Navicom RT160 fixed VHF radio + portable VHF
Furuno 1623 radar, 6-inch LCD display, 2.2 kW
Raymarine ST50 Tridata (depth sounder, speed log, wind instrument)
Raymarine ST60 repeaters (3 cockpit units to be replaced – displays have become cloudy due to UV exposure)
Furuno GP32 GPS + portable GPS
ICOM IC-706MKIIG SSB transceiver with SmartTuner SG-237 antenna tuner
SCS Pactor modem
USB GPS antenna
TK 32-inch flat-screen TV (11/2025)
Glomex V9150 TV antenna
WiFi antenna + onboard WiFi router (V4), 2.4 GHz
Altitude electronic barometer
Sangean ATS818CS FM/SSB radio receiver
Plastimo Olympic 135 steering compass at the helm station
ADDITIONAL EQUIPMENT:
Stopani Clipper paintwork
Portable power tools (sanders, etc.)
43 mm closed-cell polyurethane foam thermal insulation
Steel plate thicknesses: below the waterline: 12 mm – above the waterline: 10 mm – deck: 8 mm – coachroof: 6 and 8 mm
570 L fuel tank integrated into the keel – lead ballast encapsulated in diesel fuel (no risk of electrolytic corrosion)
Lead ballast: 2,400 kg
Self-feeding elevated diesel day tank above the engine (50 L)
Hull protection: Doxanode inorganic zinc silicate coating




