top of page

OVNI 450 - 2022 - $780,000 (USD)

OVNI 450 (32).gif

Built at the Alubat shipyard to a design by Marc Lombard, the OVNI 450 is already a best-seller among aluminum cruising sailboats. An evolution of the OVNI 445, highly prized by those embarking on new adventures, the 450 is its modernized version. This vessel, equipped with every comfort and a very good selection of equipment, features two cabins and an aft technical storage area. Launched in 2022, its very experienced owners, who need to stay ashore for a few years for family reasons, are therefore putting it up for sale.

Technical Specifications

Architect: Marc LOMBARD - ML YACHT DESIGN GROUP
Construction: Aluminium 5083 H111 and T6 6060 profiles
Hull length: 13.98m
Length at waterline: 12.66m
Maximum beam: 4.29m
Draft: 1.05m/2.90m
Air draft: 19.50m (excluding antennas)

Weight (lightweight CE and maximum): 11.550kg / 14.550kg
Ballast: 3.725 kg, including 500 kg of keel
Fresh water capacity: 2 x 270L
Diesel capacity: 2 x 250L
Black water: 55L
Engine: Volvo D2-50 (50hp) shaft drive
CE Certification: A - 8 pax

Administrative situation

Flag: USA
Leasing in France: possible under conditions
Berth in the port: no

Location: USA East Coast

Inventory

Engine

Make: Volvo Penta
Model: D2-50
Power: 50 CV
Drivetrain: Shaft drive
Operating hours: 887 hours
Propeller(s): Three-bladed, featherable

Servicing up to date and performed annually. Heat exchanger cleaned according to the manufacturer’s schedule.
Dual RACOR diesel filter and SPUR fuel line cut-off valve

Life Aboard

Two-burner induction cooktop for cooking at anchor or in port and saving gas
New mosquito nets on the deck hatches
Sun awning stowed on the boom (can remain stowed in place even during a crossing) and deploys quickly and easily when needed.
Everpure cartridge freshwater purification system (1-micron filtration)
Port-side gas grill mounted on the aft balcony
Rigid aluminum watch shelter with red/white light and handrail

2 aluminum sea bream boxes welded to the deckhouse
Welded aluminum instrument console
Deck panel in the aft starboard bathroom
Synthetic teak on the swim platform
Cockpit seat and backrest cushions
Cockpit table cover
Fabric and crystal rear closure for the wheelhouse
External curtains to protect the plexiglass panels of the aluminum wheelhouse
2-cabin version with workshop
Insulated forward sail locker with 12V outlet, light, access ladder, and flooring
Additional cabinetry in the forward cabin (port and starboard)
Oceanair blackout curtains on all deck hatches
6 12V fans, including one in the utility room/workshop
Stairway with 2 Altuglas swing doors
Additional freezer in the galley
AQUABASE watermaker—12 volts, 65 L/h, with automatic rinse
Eberspächer Hydronic M8 hot-water circulation heating system
FRIGOMAR 16,000 BTU 110V reversible air conditioning (2 units) for the salon and forward cabin
Large, very comfortable forward cabin—double berth (205x160 cm) and ample storage
Large, very comfortable portside aft cabin—double berth and ample storage
Utility compartment with easy access to equipment (electrical system, watermaker, fuel filters, etc.) and a single berth
Large, comfortable saloon
Kitchen running the length of the starboard sideStaron one-piece kitchen countertop
Sink with mixer faucet and foot-operated seawater pump
Stainless steel refrigerator and freezer with drawers
Portside aft bathroom with separate shower, sink with mixer faucet, and Jabsco marine toilet
Light oak interior woodwork—beautiful and in like-new condition


Safety

2 stainless steel mast decks
2 modern bilge pumps + 1 spare
Suzuki 6cv outboard motor for the dinghy
Highfield 310 semi-rigid dinghy
Dinghy retention system in the davits, optimized for rough crossings
Safety equipment to be adapted to the destination country’s regulations

Maneuvering

Aft davit
Anchor locker with a central longitudinal partition and a 300-mm anchor cleat
Additional remote control for the windlass at the helm station
100-kg/12-V tunnel-mounted bow thruster

 


Rigging & Sails

Dacron genoa on a furler
Dacron staysail on a furler
Aluminum mast with 2 sets of spreaders, mounted on deck
Tri-color and white LED masthead light
Aluminum boom
52 m² battened mainsail (horizontal-cut Dacron) with 3 reefs, 2 of which are automatic
Mast track and ball-bearing blocks
Original lazy bag
+ New “Evolution” lazy bag with lazy jacks, removable front section for cruising 
Spectra mainsail halyard
Gennaker (Code D) and its dedicated hardware (Dyneema halyard, sheets, and blocks)
Dacron furling staysail
Dyneema textile backstays
2 46 AST staysail winches
1 46 AST deckhouse winch
1 46 AEST electric deckhouse winch
2 54 AEST electric winches in the cockpit
Gennaker sheet traveller adjustments from the cockpit
New Colligo top-down furling system for the spinnaker, torsion rope, continuous-line furler, new sheets, heavy-duty halyard shackle, 2 top swivels—1 for the spinnaker, 1 for the1 for the Code “0” sail.

Additional line stopper for the spinnaker and Code “0” sail, 1 tack swivel for downhaul control
Colligo Marine furler and complete spinnaker hardware set 


Electrics


LED courtesy lighting at the helm stations (x2)
LED lighting on the companionway steps (x3)
LED interior lighting, including red lighting in the galley
Interior courtesy lighting
Additional reading lights for the port side saloon seating
Silent Wind Pro wind turbine on an aluminum mast (with regulator)
2x130W solar panels on the aft gantry (with regulator)
Extended service battery bank: 3 Mastervolt AGM 160 Ah batteries
90Ah engine and generator starter battery. 
1 MasterVolt Mass Combi 12-220V/3000W/100Ah charger/converter. 
MasterVolt Mass GI 3.5 isolation transformer. 
1 MasterVolt 500CC DC distribution unit
1 MasterVolt Master Shunt 500 battery controller
1 MasterVolt Masterview Easy display
2 additional 12V outlets—at the starboard helm station and on the companionway
4 additional USB ports—at the starboard helm station and on the companionway
7 220V outlets
Fisher Panda Neo 5000i 4 kW Diesel Generator - 110 V/220 V
Hydrogenator
Hydrogenator mounting system optimized for easy installation and removal


Electronics


B&G Triton electronics package with 2 displays
Autopilot with B&G/Simrad NAC-3 control unit
Lecomble & Schmitt LS 40ST16 servomotor
Simrad Precision 9 autopilot gyrocompass
B&G ZEUS 3S 9-inch touchscreen at the starboard helm station + Navionics France chart + Pod
B&G V60 VHF with AIS + GPS
VHF antennas
Fusion Bluetooth radio/Hi-Fi system + 4 speakers (2 inside, 2 outside)
B&G AIS transceiver
B&G HALO 20+ Radar - 36 miles
3 B&G Triton T41 displays: 1 at the helm, 1 on the companionway, 1 at the chart table with autopilot controls
B&G charts for Eastern Europe, the Canary Islands, the Caribbean, the Bahamas, and the U.S. East Coast
Predict Wind DataHub installed, centralizes and limits data-intensive internet connections


Miscellaneous


Aluminum fender welded to the hull (for protection when moored to posts, for example)
Bimini top with stainless steel frame and side sun shades
Deck wash pump for seawater and freshwater
Numerous spare parts for the Volvo engine, the Aquabase watermaker, the Fischer Panda generator, water filters, the bow thruster, the Lewmar windlass, general maintenance... over $10,000 worth of spare parts on board
4 additional fenders (8 on board) + 2 fender balls
2 dinghy covers; 1 custom-fit, permanent UV-protective cover + 1 full-coverage cover (top and bottom) for storage on the crossbar

​

bottom of page