L'Esprit d'Equipe 17.60m Aluminum - 1981 - €210,000 (VAT included)
NEW PRICE REDUCTION

Designed by Philippe Briand and built in custom-shaped aluminum at CNA Dufour, formerly named "33 Export II," this large, crewed, offshore racing aluminum sloop is a true legend. With three Whitbread Round the World Race participations, including a victory in 1985-86, and designated Bateau d'Intérêt Patrimonial here in France, it competed in the last Ocean Globe Race in 2023. For this, it underwent a major refit in 2021 and 2022, along with some fundamental improvements, notably to the bilge drainage system. The list of work carried out is impressive, and the boat has just completed a round trip to Brazil (returning in December 2025). Capable of very good average speeds, it would be the perfect vessel for the next OGR or a sailing school (10 berths).
Technical Specifications
Architect: Philippe Briand
Construction: AG4 MC aluminum on traditionnal structure
Hull length: 17.60m
Length at waterline: 14m
Maximum beam: 4.85m
Draft: 2.75m
Cabins: 2
Sleeping capacity: 10 (8 while sailing, 2 more in harbours)
Construction site: CNA Dufour Périgny / FRANCE
Light displacement: 17,050 kg
Weight: Lead fin
Fresh water capacity: 340L
Diesel capacity: 200L
Black water tanks: no
Engine: Volvo Penta D2-75 (2026) shaft drive
First owner: no
Administrative situation
Flag: France
Berth in the port: no
Location: Atlantic France
Inventory
Engine :
Brand: Volvo Penta
Model: D2-75
Power: 75CV
Operating Hours: 0 hours
Transmission: Shaft drive
Propeller(s): four-bladed, foldable
Engine installed new in 2026—bipolar kit installed and properly maintained—PSS rotary seal (2022) on stainless steel shaft (2022)—gear shift (2022) and four-bladed foldable propeller (2022)
Comfort / Accommodation :
Webasto diesel-powered forced-air heater(s) (2022)
Aquabase 24V watermaker, 65 L/h (2022)
Interior fittings made of foam sandwich panels, bonded and screwed together (2022)
Rigid aluminum and plexiglass companionway cover (plexiglass 2022) + canvas extension (1 used, 2022; 1 new, never installed)
10 single berths on frame bunks distributed throughout the boat:
2 aft cabins with stacked frame bunks (2 berths per cabin for a total of 4 bunks)
2 stacked frame berths on each side forward of the saloon (for a total of 4 berths)
2 frame berths in the forward cabin (used primarily for storage while sailing)
- These two frame berths hold the record for sailing around the world in reverse—formerly aboard Adrien
Central saloon (the saloon benches double as water tanks)
Galley running fore-to-aft on the port side
Custom-built stainless steel double-bowl sink(s)
Marine toilet
Eno Force 10 2-burner gas stove/oven (2022)
Top-loading refrigerator with separate DANFOSS 24V refrigeration unit (2022)
Watermaster 12L pressurized water system – 24V (2022)
Helmsman’s cockpit and crew cockpit (forward of the companionway) with Seacork flooring (2022), in very good condition
Safety :
Foam-lined bottoms + watertight aluminum floor (2022) to create bilges (which did not exist previously)
2 electric bilge pumps (82 L/min) in bilges with strainers on either side of the ship’s centerline (2022)
1 electric bilge pump in the wheelhouse
2 manual bilge pumps (2022)
Randex valves (2022)
4 2-kg fire extinguishers (2022) Valid until 12/2026
2 life rafts (2022 and 2023) – Safety Ocean Compact-10P / with grab bag; must be on board for at least 24 hours
2 KANNAD SAFEPRO manual EPIRB emergency beacons with GNSS receiver
Maneuver :
Anchorage #1 with a 35-kg SPADE anchor, 50 m of 10-mm-diameter stainless steel chain, and 30 m of weighted line
Anchorage #2 with a 20-kg Soc anchor + 30 m of rope at the base of the mast.
1 additional Fortress Light FX11 anchor
Column-mounted steering wheel
6 welded aluminum mooring cleats
Removable aluminum bow roller on the bow fitting
Rigging and sails :
Dyform stainless steel standing rigging replaced in 2022 + partially replaced in 2024
Aft stays on SAILTEC hydraulic cylinders (2022)
Sparcraft aluminum mast mounted on the keel—3 sets of spreaders replaced in 2022
HARKEN mast track and blocks (2022)
Z-Spars aluminum boom / 2014
Dimension Polyant Dacron Proradial mainsail with 4 reefs (2022) – in fair condition for training or cruising
Dacron Proradial furling genoa (2022) by Voilerie des Olonnes – in fair condition for training or cruising
PROFURL C480 Genoa furler (2022)
Staysail stay
Proradial Dacron staysail on snap hooks (2022)
Upper and lower textile backstays replaced in 2022
220 sqm symmetrical spinnaker (2022) + spinnaker sock
Used 288 sqm symmetrical spinnaker + spinnaker sock
163 sqm asymmetrical spinnaker (2022) + spinnaker sock
Storm jib (2022)
Mast-foot winch: 1 x BARIENT 36
Sheet winches and spinnaker boom: 2 x BARIENT 36 3-speed winches coupled to the mast
Spinnaker sheet winches: 2 x BARIENT 32S at the roof
Halyard/sheet winches: 2 x LEWMAR 55ST (2022)
Mainsail sheet winch: 1 x BARIENT 36
Staysail sheet winches: 2 x LEWMAR 65ST (2022)
Genoa sheet winches: 2 x LEWMAR 80ST (2022)
2 Genoa sheet tracks + HARKEN cars (2022)
2 Staysail sheet tracks + HARKEN cars (2022)
1 LEWMAR mainsail sheet track + car (2022)
HARKEN (2022) and MARECHAL blocks in used condition
ANTAL and SPINLOCK cleats (2022)
2 SPARCRAFT anodized aluminum spreaders, Ø120 (2022)
Complete running rigging (2022 and replacements as needed)
Electrics:
8 VICTRON sealed GEL batteries, 12V-60AH (2022); 2 sets of 4 batteries (2023)
Dolphin Pro 12V/70A engine starter battery (2022)
Alternator: 12V / 115A (2020) X
Alternator: 24V / 80A (2020) X
2 solar panels, 2x100W (2022), on deck + 2 portable panels, 2x100W
1 24V/220V 3000W inverter
Bipolar electrical system completely redone in 2022; the engine and service circuits are
DC circuit breakers on both positive and negative terminals for engine and service circuits
1 24V two-pole electrical panel in an IP66 enclosure
Circuit protection via thermal-magnetic circuit breakers
Isolation monitor
2 Victron battery managers (engine and service)
1 Energie Mobile MCH 24/12 IP67 X portable battery charger
230V circuit
Electronics :
AUTOHELM 6000 autopilot with gyrocompass + new actuator (2023), not installed
RAYMARINE 63 VHF (2022) with Class D Digital Selective Calling (DSC)
2 VHF + AIS antennas at the top of the mast + 1 antenna on the aft deck
ICOM M801E MF & HF SSB Class E transceiver at the console
AT-141 automatic antenna tuner (2022)
Iridium GO + external antenna (2022)
Raymarine Element 7 chartplotter
ICOM IC-M56 VHF
OCEAN SIGNAL ATB1 Class B AIS transponder + external antenna and multiplexer (2022)
Furuno Fax 208 MKII Weather Receiver
Complete Furuno 1818 Radar (2022)
Raymarine ST60 / ST70 Instrument Cluster (Log, Speedometer, Depth Sounder, Wind Vane, and Anemometer) (2022)
1 Compass on the tiller column + 2 Course Compasses in the cockpit (2022)
1 Set of paper charts
Miscellaneous :
Sprayed cork thermal insulation inside
Regular maintenance and antifouling while ashore
Fuel tanks: 2x1200L + 1x500L; cleaned in winter 2022/23
Fresh water tank(s): 2x170L aluminum (2022)
200L aluminum diesel tank in the bilge under the saloon (2022)
Bilge plate replaced with a new one in 2015
Complete stripping, inspection, and replacement of sheet metal where necessary (2022); watertight welds tested using penetrant inspection
Redesign of the bow, stem, and forestay chainplate—20mm aluminum sheet—(2022)
Complete epoxy coating (2022)
Non-slip deck coating (2022)
Redesign of the cockpit drain scuppers (2022)—watertight welds tested by penetrant inspection
SEAJET semi-erodible matrix antifouling
Reinforcement of the deck structure with 21 aluminum struts welded to the stringers and the deck framing (2022)
Installation of a forward crash box and two watertight bulkheads, one forward and one aft (2022)
Installation of a structurally welded, foam-filled aluminum floor to create four bilge wells
Lead keel bolted to the bottom plate




