Atlantis 430.3 - Year 2012 - €330,000 (VAT included)

Designed by Gilbert Caroff, meticulously built by Dujardin-ICOFRANCE, and fitted out to very high standards by ACS at the request of its first and only owner, this aluminum centerboarder with a shaped hull on stringers and frames, twin rudders, insulation, and heating, can be easily sailed by two people (and even single-handed). It offers three comfortable cabins, including two doubles, an additional berth in the saloon, and a very pleasant and bright deck saloon. Launched in 2012, it has been equipped for both safety and self-sufficiency (100l/h watermaker, Watt&Sea hydrogenerator, wind turbine, solar panels, towed generator, etc.). The overall quality is comparable to the best in shaped aluminum construction, equipment, and interior fittings. The spacious and well-protected cockpit leads to a comfortable and roomy swim platform; it's ready for its new crew to set sail again, whether in warm weather or cold.
A word from the owner:
"After ten years of sailing, we are selling our cruising sailboat, equipped for a round-the-world voyage. With its shallow draft (centerboard up), we were able to fully enjoy the most inaccessible anchorages and navigate up rivers throughout our journey (we especially loved the Sine Saloum delta in Senegal). We also focused heavily on energy self-sufficiency and equipment that allows for sailing with a small crew. All of this was made possible during its design and construction thanks to the availability of the metalwork teams at Dujardin Icofrance and those at ACS for the interior fittings. The result is a highly refined sailboat, of top-of-the-range quality, offering remarkable comfort and a very attractive aesthetic. Of course, we have continued to improve and develop our sailboat over the years."
Technical Specifications
Year: hull 2009, completion of construction and launch 2012
Shipyard: Dujardin ICOFRANCE / ACS - FR
Architect: Gilbert CAROFF
Length: 13.80 m
Width: 4.30 m
Material: aluminum
Version: 3 cabins
Rigging: Cutter
Draft: 0.95 / 2.40 m
Ballast type: Full centerboard
Light displacement: 12,500 kg
Load capacity: 15,000 kg
Ballast weight: 4,200 kg
Engine: Nanni Diesel N4.85 (approximately 3100 hours)
Cabin(s): 3
Sleeping capacity: 7
Fuel capacity: 585 L
Water capacity: 600 L
Visible: Atlantic France
Administrative situation
Flag: France
VAT status: EU VAT paid
Leasing: no
Berth in the port: no
Inventaire




Engine :
Brand: Nanni Diesel
Model: N4-85
Power: 85 CV
Transmission: Shaft drive with cut-off clutch
Operating hours: approximately 3,100 hours
Propeller(s): Three-bladed MaxProp with feathering
Up-to-date and regular maintenance (at least annually); turbo service / hydraulic reverse gear oil change in March 2025, Hydrolube ring replaced and heat exchanger cleaned in November 2023, silent blocks replaced in December 2019, rotating seal and exhaust elbow replaced in April 2019. Main hour meter is out of order, but a new hour meter has been installed with the previous hours recorded. Fixed three-bladed emergency propeller.
Emergency start button (keyless) in the engine compartment.
Comfort / Accommodation :
Dessalator 100L/h 12V Water Desalination System (membranes replaced 11/2021, membrane seals and valves replaced 10/2025)
Manual water desalination system
Eberspächer diesel-powered water-circulation heater / air heaters—circulation pump replaced 10/2025
Elevated panoramic saloon—deck lounge—with vertical windows offering a beautiful 180° view
Solid wood saloon table with adjustable top on jacks
Red fabric saloon upholstery—in excellent condition
Saloon backrest on the galley side mounted on a retractable stainless steel frame
Anti-roll nets on a saloon bench seat that can be used as a berth while underway
Very light wood-grain laminate interior floors (in very good condition) — lockable
Light cherry wood interior paneling, varnished, very attractive
Large chart table facing the bow with dedicated seating — starboard side at the bottom of the companionway
Long kitchen on the starboard side
Corian kitchen countertop
Dometic gas stove—stainless steel—2 burners and gas oven (new in 2026)
Stainless steel 3-bowl sink(s) with mixer faucet
Pressurized water system (pressure switch replaced in 10/2025)
Foot-operated seawater and freshwater pump
Seagull IV drinking water filtration system (11/2022)
Stainless steel 12V front-opening refrigerator
12V freezer under a seat in the saloon
Ample storage space in the galley
White ceiling paneling, in very good condition
Owner's cabin at the mast step with a double bed (200x160) on a slatted frame and plenty of storage space
Anti-roll board
Forward bathroom with separate shower, Lavac marine toilet, and sink; plenty of storage (mirror 10/2025)
Corian countertop in the bathroom
Forward cabin/workshop with two fold-out berths and storage
Port aft cabin with double berth (200x140 cm at the shoulders) on a slatted bed frame and plenty of storage
Anti-roll board
Large aft starboard bathroom with Lavac marine toilet, shower, and sink, washing machine (mirror 10/2025)
80L black water tank(s) (rear toilet) and 80L gray water tank (bathroom lift pumps 10/2025)
Space for a washing machine with water and electricity
Corian countertop in the bathroom
75L hot water tank (220V + motor) – insulated
Outdoor hot/cold shower
Aluminum handrails welded to the companionway and on the skirt
4 12V fans (cabins and saloon)
Ventilation via 4 Vetus air vents on porthole frames
Headroom in saloon/galley = 190 cm
Eno Gas Barbecue/Plancha
Upholstery/sun loungers on the deckhouse
Sun awning on the boom
Safe (2)
Cockpit with teak grating floor, teak seats + cushions and full-length backrests
Teak cockpit table, aluminum base, 2 teak folding leaves, and removable extension
Large aft skirt with aluminum swim ladder, storage lockers, and Watt&Sea/outboard mount, aft bow roller
Seawater pump for rinsing in the aft scoop
Safety :
Viking 8-person liferaft in a container, manufactured in 2011, serviced in 2022—major overhaul or replacement to be scheduled
Welded aluminum through-hull fittings
10 automatic life jackets: 4 Viking + 4 Homing PLB beacons + 4 Certec life jackets + 2 children’s life jackets
Lifesling, IOR pole, horseshoe buoy,
McMurdo G5 Smartfind Plus GPS EPIRB (inspected 2018/19)
Fixed bilge fire extinguisher
3 ABC fire extinguishers (inspection due 2022)
2 electric bilge pumps + 1 manual bilge pump
Aluminum pulpits and stanchions + stainless steel handrails
Comprehensive safety equipment—to be checked and supplemented according to the requested flag or navigation area
Maneuver :
Vetus 90kg tunnel bow thruster
Aluminum stern gantry, serving as a davit (Garcia-style tilting aluminum arch), panel mount, and antenna mount
Lofran's Tigre 1200W/12V electric windlass (motor replaced in 03/2023) with controls at the bow and in the cockpit
Aluminum mast balconies (x2)
Anchor set #1 with a 25 kg Spade anchor, 90 m of 12 mm chain (galvanized in 2019/20) + 100 m of floating line
Anchor set #2 with a 20 kg Spade anchor + 40 m of 12 mm chain + 80 m of floating line
15 kg aluminum Spade anchor
Classic iron anchor handle + double storm anchor
Advanced hydraulic steering wheel mounted against the cockpit bulkhead—under the canopy
MAX PROP three-bladed propeller with feathering capability
Welded aluminum propeller guard
Aluminum twin rudders—bearings replaced in November 2022
8 mooring lines, 14 mm diameter
2 mooring lines, 40 m long, 14 mm diameter
1 towline, 100 m on a stainless steel reel
1 floating mooring line, 100 m on a stainless steel reel
4 “winter” mooring lines, 20 mm diameter, with metal and rubber shock absorbers
2 x 50 m of floating line on rear reels
1 weighted line, 50 m
A generous supply of fenders
2.20 m wooden gangway
3 m foldable aluminum gangway in 3 sections + accessories
Stainless steel deck chair mounted on the transom
3D Tender semi-rigid aluminum-hulled dinghy—PVC tube in fair condition—fabric cover and tiller extension
4 “winter” mooring lines, 20 in diameter, on metal and rubber shock absorbers
2 x 50 m of floating line on rear reels
1 weighted line, 50 m
A generous supply of fenders
2.20 m wooden gangway
3 m foldable aluminum gangway in 3 sections + accessories
Stainless steel deck chair mounted on the transom
3D Tender semi-rigid aluminum-hulled dinghy—PVC tube in fair condition—fabric cover and tiller extension
Suzuki DF6 6cv/4-stroke outboard motor (2012), propeller from 2021, serviced in 03/2025
Tohatsu 9.8cv/2-stroke outboard motor (12/2021), serviced in 03/2025
Stainless steel mounting mast/crane for installing the engine on the dinghy (02/2024)
Rigging and sails :
Original standing rigging, continuous + double backstay, inspected in November 2022—properly sized
Sparcraft aluminum mast with reinforced base, 2 sets of spreaders in line, 17.20 m
Folding mast steps extending to the masthead
Sparcraft aluminum boom, reinforced boom vang replaced in November 2022
Sparcraft reinforced push-type rigid halebas
Wichard boom brake
Lazy Bag (installed 11/2021) and lazy jacks
Original standing rigging, continuous + double backstay, inspected in November 2022—properly sized
Sparcraft aluminum mast with reinforced base, 2 sets of spreaders in line, 17.20 m
Folding mast steps extending to the masthead
Sparcraft aluminum boom, reinforced boom vang replaced in November 2022
Sparcraft reinforced push-type rigid halebas
Wichard boom brake
Lazy Bag (installed 11/2021) and lazy jacks
Hydranet full-batten mainsail (4 reefs) with strap and carabiner on mast track and ball-bearing cars (inspected 03/2025)
Hydranet 68 sqm genoa on a furler—inspected and UV-coated 03/2025
Harken genoa furler
Releaseable forestay with pelican hook for solent
40 sqm Dacron solent, riggable with carabiners
28 sqm staysail on a furler
Harken staysail furler
2 running backstays
Fore-sail sheet traveller systems adjustable from the cockpit
140 sqm symmetrical spinnaker, nylon, in snuffer
8 sqm storm jib
12 sqm Swedish (storm) mainsail on mast track (starboard offset)
2 carbon spinnaker poles stowed on deck
Aluminum bowsprit for gennaker
8 Anderson winches:
- 2x60ST electric – starboard (needs to be restarted) – genoa sheets
- 2x45ST – staysail sheets
- 1x52ST at the piano
- 1x40ST at the piano
- 2x45ST at the mast foot
Winch handles
Moorea electric winch handle with dedicated connection in the cockpit table
Mainsail, genoa, staysail, solent, and gennaker halyards made of 12mm-diameter Dyneema (mainsail and genoa halyards replaced in 2023/24)
14mm-diameter polyester sheet lines
10mm-diameter Dyneema centerboard hoist line
Complete running rigging and hardware in good condition for the sails currently on board
Electrics :
Solar panel(s) (2x100W) on the gantry
4x120W semi-rigid solar panel(s) (11/2022) on the bimini (connections inspected 10/2025)
Watt&Sea long-shaft hydrogenerator
ATMB D400 wind turbine on the boom
12V 300A generator (mounted in series/parallel)
100A engine alternator
Dedicated electronics battery bank: 3x200Ah AGM (03/2025)
Auxiliary battery bank: 3x200Ah AGM (03/2025)
Windlass battery: 75A gel (2019)
75A gel bow thruster battery (2019)
110A engine starter battery (03/2025)
Isolation transformer
Xantrex battery, water, and fuel manager
1000W charger/inverter
Electrical leak detector
12/230V electrical system
LED interior lighting
Deck spotlight on the mast (10/2025)
Electronics :
Aluminum drop-down console for displays
B&G Zeus 3 chartplotter (11/2021) on drop-down console—Navionics Europe charts valid through 03/2025
Multimedia screen in the saloon
Starlink antenna
B&G autopilot, L&S hydraulic actuator (seals and ball joint replaced 11/2022)
Autopilot control panel at the chart table and in the cockpit
Wireless autopilot control
Iridium 9555 satellite phone
Portable GPS
B&G 3000 navigation unit (speed log/depth sounder/wind)
Ultrasonic electronic wind vane and anemometer replaced in January 2023
Graphical depth sounder
Simrad 3G BR24 radar
Furuno Navtex receiver
Simrad AI 50 Class B AIS transceiver
Furuno GP32 GPS
Navigation center repeaters at the chart table
Simrad RS 82 25W fixed VHF DSC, indoor/outdoor combo—antenna replaced 10/2025
Icom portable VHF (10/2025)
Computer monitor at the chart table
Tablet mount at the helm station
Compass
Miscellaneous :
Styrodur thermal insulation (40 and 50 mm) + multilayer vapor barrier—highly effective
Deck paint: sandblasting and full paint cycle + micro-bead anti-slip coating 02/2024—in excellent condition
Hull: sandblasting and full epoxy paint cycle 02/2024
All anodes (hull, propeller, thruster) 03/2025
Inspection of hull welds and lead ballast insulation (ingots on blocks embedded in resin) 02/2024
Wrap-around companionway cover on stainless steel frame—fabric 03/2025 + winter curtains and Batyline on the “crystal” sections
Bimini top on stainless steel frame, fabric 03/2025, with side and rear rain guards + side and rear sunshades
Winter deck panel/porthole covers (fabric) 03/2025 and summer (Batyline)
Numerous covers (winches, companionway console, helm station, etc.)
Watertight fender lockers + large cockpit lockers
15L diving package with stabilizer, regulator, dive computer, and headlamp
Freshwater and diesel tanks inspected and cleaned in February 2024
CE Certification A-8 - Declaration of Conformity
Sheet metal thicknesses: 12mm bottom, 8mm to 6mm sides, 5mm deck
