CONTEST 55 CS - 2001 - €465,000 incl. VAT

Born from Dutch expertise and know-how, the Contest 55CS embodies the quintessence of high-performance offshore cruising. Built by the prestigious Conyplex shipyard, it combines elegance, power, and safety with a refinement rarely equaled.
Every aspect of this sailboat testifies to exceptional engineering: a modern hull offering a perfect balance between performance and comfort, an efficient sail plan that guarantees fast and serene crossings, and exemplary stability, even in the most demanding seas.
On board, the Contest 55CS impresses with its understated and welcoming luxury. The interiors, bathed in light thanks to the large windows, subtly blend high-end finishes with technological innovations. Every space is designed for comfortable living on board, whether for extended cruising or enjoying the pleasure of a peaceful anchorage.
With this iconic model, Conyplex has managed to push the boundaries of semi-custom construction.
Its current owner, a maritime expert, has further improved and maintained it to perfection over the past few years: new standing rigging and sails, engine and generator refit, new batteries, teak deck refurbishment, etc. He is changing his plans and therefore wishes to sell his sailboat to someone who will continue to sail it.
A word from the owner:
"As the second owner of this Contest 55, I can say that it has been much more than just a boat to me: a true traveling companion. I have sailed extensively on board, on offshore cruises with wonderful stopovers, always with the same feeling of safety, comfort, and the sheer pleasure of sailing. Over the years, I have maintained and restored it tirelessly, always striving to preserve its original qualities while modernizing it. Every improvement has been designed for long and long voyages: a generator removed and fully serviced, air conditioning for comfort in all climates, new high-performance sails (Hydranet), and entirely new standing rigging... It is a sound boat, ready to set sail again, inspiring confidence from the very first miles, and just waiting for a new owner to continue its story."
Technical Specifications
Year: 2001
Construction site: Conyplex/NL
Architect: Doug PETERSON and Georg NISSEN
Length: 16.75m
Width: 4.65m
Material: Balsa/Polyester Sandwich - Isophthalic Resin
Version: Owner's rear cabin
Rigging: Cutter
Draft: 1.95m
Ballast type: Cast iron/lead winged keel
Displacement: 24,800 kg
Ballast: 8,870 kg
Engine: Perkins M225 - 225hp (3000 hours)
Cabins: 3
Sleeping capacity: 6
Fuel capacity: 800L
Water capacity: 1000L
Visible: Spain, Mediterranean
Administrative situation
Flag : France
VAT status: EU VAT paid (France)
Leasing: no
Berth in the port: no
Location: Spain, Mediterranean
Inventory
Engine
Make: Perkins
Model: M225
Power: 225 HP
Drive: Shaft drive
Engine hours: 3,000 hours
Propeller(s): Max-Prop three-blade feathering propeller
Max-Prop three-blade propeller dating from 2010 – complete engine service carried out in 2025 (including heat exchanger, exhaust elbow, etc.)
New engine-room insulation (2025)
Comfort / Onboard Living
Forward cabin with double berth, wardrobe and plenty of storage
Starboard side cabin with two single bunk berths, wardrobe and plenty of storage
Forward heads compartment with separate shower, marine toilet, washbasin and plenty of storage
Aft owner's cabin with large double berth, wardrobe and plenty of storage, plus private heads compartment
Owner's cabin marine mattress replaced in 2025
Private aft heads compartment with separate shower, electric toilet, washbasin and plenty of storage
Interior teak joinery with varnished finish
Varnished wooden floors – floor varnish refurbished in 2025
Varnished wooden companionway steps
Saloon upholstery in faux leather (2020)
Forward sail locker, accessible through a deck hatch
Teak side decks and deck – excellent condition, refitted in 2025
Side access gates in guardwires
Teak-slatted cockpit sole – excellent condition
Teak-slatted cockpit seating – excellent condition
Teak-slatted aft bathing platform – excellent condition
Teak rubbing strake – excellent condition
Folding cockpit table with two wooden leaves
Cockpit cushions
Sprayhood with stainless-steel frame and Dune fabric (2020)
Cockpit Bimini with stainless-steel frame and Dune fabric (2022)
115L front-opening 12V refrigerator
Deep-freeze compartment (refrigeration unit replaced in 2020)
45L hot water tank – 220V + engine heat exchanger (2025)
Pressurised hot and cold water system
ENO Force 10 stainless-steel three-burner cooker/oven
Siemens microwave oven
Bosch washing machine (2020)
Cruisair reverse-cycle air conditioning: 16,000 BTU (saloon) + 10,000 BTU (aft cabin) + 7,000 BTU (forward cabins)
Technicomar SL watermaker, 140L/hour – high-pressure pump replaced in 2020
Holding tanks – 2 x 80L
Electric toilet in aft owner's heads compartment
Cockpit shower with hot and cold water
Filtered freshwater foot pump
Safety
All through-hull fittings replaced in 2025
Eurovinyl 6-person / 24-hour liferaft in canister (2019, next service due 01/2028)
Liferaft cradle mounted on aft pushpit (2025)
Outboard engine bracket
EPIRB distress beacon
Deck Equipment / Manoeuvring
Sleipner Extra Heavy 20 HP bow thruster – gearbox replaced in 2025
Anchor arrangement No. 1: 45kg Delta anchor + 100m of 12mm chain (2020)
Electric windlass – 2,500W (2011, refitted in 2025)
Stainless-steel davits with dinghy lifting tackles – Heavy Simpson 125
Dinghy outboard engine lifting crane
Berenzoni hydraulic aft passerelle
Stainless-steel steering wheel with leather covering on JEFA pedestal
Polyester rudder on aluminium stock / JEFA bearings
Rigging & Sails
Dyform standing rigging, generously specified and completely replaced in 2025
Complete mast inspection (electrical wiring, navigation lights and lighting) – 2025
Dyneema running rigging (2025)
4 electric Andersen self-tailing winches for genoa and staysail sheets
2 Andersen self-tailing winches on coachroof for mainsail sheet adjustments
Mainsheet traveller on coachroof
Deck-stepped aluminium furling mast, three sets of spreaders, white lacquered finish
Proctor hydraulic in-mast furling system
White-lacquered aluminium boom – repainted in 2025
Rigid boom vang – replaced in 2025
Incidence Hydranet in-mast furling mainsail, 66.9m², with vertical battens (2026)
Reckmann hydraulic genoa furler – serviced in 2025
New Incidence Hydranet furling genoa, 94.6m² (2025)
Reckmann hydraulic staysail furler – serviced in 2025
Technic Voile Hydranet furling staysail, 24.6m² (2020)
Complete asymmetric spinnaker rigging
Aluminium spinnaker pole stowed on mast
Incidence asymmetric spinnaker in snuffer (2023)
Adjustable hydraulic backstay – cylinder replaced in 2022
Electrical System
Fisher Panda 6 kVA generator (refitted in 2025)
Seatronic solar panels, 2 x 175W (2025)
Seatronic S600 hydrogenerator (2025): 110W at 5 knots, 175W at 6 knots (generates power from 3 knots)
Engine start / windlass / bow thruster batteries – 4 x Optima 55Ah (2025)
Service batteries – 8 x 150Ah AGM (2024)
Victron Phoenix 12V/220V inverter/charger, 50A / 1,500W (2018)
230V shore power connection
230V interior electrical circuit with power sockets
LED navigation lights (2025)
LED interior lighting
Electronics
Inboard autopilot + spare drive unit – B&G + Raymarine
B&G navigation system
B&G cockpit repeaters
2 B&G Hydra 2000 repeaters at chart table
Chart reader at chart table
SIMRAD GPS/chartplotter in cockpit (not working)
Electronic charts
Furuno radar with radome mounted on mast bracket
AIS transceiver (transmit/receive) + dedicated antenna (2025)
Sailor VHF at chart table
Handheld VHF
Cockpit VHF speaker
Pioneer radio/CD player + speakers
Seatronic PC with monitor and OpenCPN (2025)
Iridium satellite communications
Miscellaneous
Blue hull
Hull stripped and new antifouling applied (02/2026)
Spare fixed three-blade propeller
Headroom: 2m
Air draft: 24.90m




